PP820-24
Instructions:
- Turn water off at the tap.
- Remove old basket strainer.
- Clean thoroughly around drain opening in sink.
- Remove locknut A and washers B and C and bottom slip nut D and washer E.
- Apply a small amount of putty evenly around top hole in sink about 1/2" from opening.
- Insert basket strainer into sink opening.
- Slip large rubber and friction washer up to sink. Thread locknut A up to washers and tighten.
- Put washer E on tailpiece extension. Connect tailpiece to strainer with slip nut D. Tighten to strainer. Run water to test for leaks.