Solvent Weld Tubes — Installation Instructions

PP911W

1-1/2" x 12" Extension Tube

Pp910w
The Solvent Weld Extension Tube installs easily to extend and complete a plumbing drain installation.
RECOMMENDED PROCEDURE FOR INSTALLATION:
  1. Turn water off at the tap.
  2. Remove old extention tube (if any).
  3. Measure distance X, as illustrated.
  4. Cut extension tube to length with hacksaw.
  5. Solder weld extension tube tailpiece at point S.
  6. Connect bottom of extension tube to waste drain tube and hand tighten. Run water to test for leaks.