Toilet Repair Parts — Installation Instructions

PP23004

Economy toilet tank repair kit For 8-1/2" tanks

Pp23004
Instructions:
Ballcock Installation:
  1. Turn off water supply, disconnect from old ballcock.
  2. Drain water from tank, remove excess water with sponge.
  3. Remove old ballcock.
  4. Insert new ballcock into hole with black rubber washer beveled side down.
  5. Screw locknut on ballcock shank, and tighten.
  6. Screw float ball and float rod into place.
  7. Reconnect supply line and refill tube.
  8. Place end of plastic refill tube into overflow tube at least 1/4” below top.
Flapper Installation:
  1. Remove flapper or tank ball.
  2. Attach flapper to ears on flush valve.
  3. Adjust length of chain and attach chain to flush lever. Note: Allow slight amount of play in chain.
  4. Turn on water and flush to test.