Toilet Repair Parts — Installation Instructions

PP23508

Flush Valve Includes flapper and chain - Fits most toilets

Pp835-8
Instuctions:
  1. Turn off water supply and flush to empty tank. Remove excess water with sponge.
  2. Disconnect water supply line from fill valve.
  3. Disconnect flapper chain from flush lever.
  4. Using a screwdriver and wrench, remove hardware to remove tank from bowl.
  5. Remove tank-to-bowl gasket, locknut and old flush valve.
  6. Place new flush valve into position with shank washer (beveled side down). Tighten locknut. Position tank-to-bowl gasket onto flush valve (Not included).
  7. Reposition tank on top of bowl.
  8. Reassemble hardware making sure that the tank is level and secure. DO NOT OVERTIGHTEN.
  9. Attach flapper chain to tank lever. Note: Allow slight amount of play in chain.
  10. Reconnect supply line and turn on water. Check for leaks.