Flexible Plastic Items — Installation Instructions

PP812-15

1-1/2" or 1-1/4" Slip Coupling

Pp812-15
The Slip Coupling is used to join two tubes. The nuts tighten with simple hand pressure.
RECOMMENDED PROCEDURE FOR INSTALLATION:
  1. Turn off water.
  2. Remove nuts and washers A, B, C and D.
  3. Slip a nut and washer on each tube to be connected as illustrated. (Use included 1-1/2 x 1-1/4 Reducer washers if necessary)
  4. Position coupling and tighten nuts. Run water to test for leaks.
NOTE: These parts are designed for a hand-tight installation. Pipe thread compound is not required.