Extension Tubes — Installation Instructions

PP12-12CP

1-1/4" x 12" Extension Tube

Pp12-12cp
The Slip Joint Extension Tube installs easily to extend and complete a plumbing drain installation.
RECOMMENDED PROCEDURE FOR INSTALLATION:
  1. Turn off water at the tap.
  2. Remove old extension tube.
  3. Remove nut A and  washer B.
  4. Measure distance X, as illustrated.
  5. Cut extension tube to length with hacksaw.
  6. Put nut A and washer B on tailpiece as illustrated.
  7. Position extension tube and tighten nuts. Run water to test for leaks.
Hacksaw,pipe or spud wrench
Teflon® Tape