Nuts — Installation Instructions


  1. Turn water off at the tap.
  2. Remove old basket strainer.
  3. Clean thoroughly around drain opening in sink.
  4. Remove locknut A and washers B and C and bottom slip nut D and washer E.
  5. Apply a small amount of putty evenly around top hole in sink about 1/2" from opening.
  6. Insert basket strainer into sink opening.
  7. Slip large rubber and friction washer up to sink. Thread locknut A up to washers and tighten.
  8. Put washer E on tailpiece extension. Connect tailpiece to strainer with slip nut D. Tighten to strainer. Run water to test for leaks.


  • Easily look up and find products
  • Create work lists of favorite products
  • View PDF catalogs and literature
  • Connect with Customer Service