Extension Tubes — Installation Instructions

PP13PB

1-1/2" Extension Tube 6" Length Polished Brass

Pp12pb
Recommended procedure for installation:
  1. Turn off water at the tap.
  2. Remove old extension tube.
  3. Remove nut A and washer B.
  4. Measure distance X, as illustrated.
  5. Cut extension tube to length with hacksaw.
  6. Put nut A and washer B on tailpiece as illustrated.
  7. Position extension tube and tighten nuts. Run water to test for leaks.

NOTE: Be sure to protect finish with cloth or masking tape before using tools.
Installation hints:
  1. When using a hacksaw, draw the blade taut in the frame to keep it from flexing.
  2. Put thread sealant tape on the drain threads before attaching nuts. This will provide a better seal against leaks.
  3. Use a scrap of cloth to protect the finish on the nuts when you tighten with a wrench.
Thread sealant tape Pipe or spud wrench Hacksaw
Iphone8_app_screen

KEENEY CATALOG APP

  • Easily look up and find products
  • Create work lists of favorite products
  • View PDF catalogs and literature
  • Connect with Customer Service