Sink Strainers — Installation Instructions

PP8PC

Kitchen Sink Strainer Stainless Steel Body

Pp66-5
Instructions:
  1. Turn water off at the tap.
  2. Remove old basket strainer.
  3. Clean thoroughly around drain opening in sink.
  4. Remove locknut A and washers B and C and bottom slip nut D and washer.
  5. Apply a small amount of putty around top hole in sink about 1/2" from opening.
  6. Insert basket strainer.
  7. Slip large rubber washer B and fiber washer C up to sink and engage locknut A.
  8. Put washer E on tailpiece extension. Connect tailpiece to strainer with slip nut D. Tighten to strainer. Run water to test for leaks.