Sink Tailpieces — Installation Instructions


1-1/2" Sink Tailpiece 6" Length 22 Gauge

Recommended procedure for installation:
  1. Turn off water at the tap.
  2. Remove old tailpiece, keep nuts.
  3. Measure distance X, as illustrated.
  4. Cut new tailpiece to length with hacksaw.
  5. Slip nut A over tailpiece and put its washer B on the tailpiece flange.
  6. Thread nut A to strainer.
  7. Place nut C and washer onto the new tailpiece and connect to waste drain tube or trap.
  8. Tighten nuts. Run water to test for leaks.
Pipe or spud wrench Hacksaw Pipe or spud wrench Hacksaw


  • Easily look up and find products
  • Create work lists of favorite products
  • View PDF catalogs and literature
  • Connect with Customer Service