Wall Bends — Installation Instructions

PP3PC

1-1/4" x 7" Wall Tube 7" Length

Pp4sn
Recommended procedure for installation:
  1. Turn off water at the tap.
  2. Remove old trap.
  3. Remove nuts and washers A, B, C and D from J Bend.
  4. Slide nut D the entire length of wall tube, as illustrated.
  5. Slip flange over wall tube.
  6. Connect wall tube to stub-out or wall connection.
  7. Put washer C on wall tube.
  8. Place nut A and washer B on tailpiece.
  9. Position J Bend. Hand-tighten nut D on wall tube and nut A tailpiece to J Bend
  10. Align parts and tighten nuts with wrench. Run water to test for leaks. Slide flange to wall.