Sink Strainers — Installation Instructions


Deep Cup Locking Shell Kitchen Sink Strainer Stainless steel

  1. Turn water off at the tap.
  2. Remove old basket strainer
  3. Clean thoroughly around drain opening in sink
  4. Place strainer in sink opening making certain that sufficient plumbers putty is used between the bottom of the strainer flange and the top of the sink to seal properly.
  5. Position black washer C and deep cup B under sink.
  6. Thread on locknut A, hold strainer firmly in place. Tighten securely with a wrench.
  7. Place tailpiece washer E inside of tailpiece with flat side of washer facing up. Insert tailpiece thru slip nut D and then assemble to the bottom of the strainer outlet.


  • Easily look up and find products
  • Create work lists of favorite products
  • View PDF catalogs and literature
  • Connect with Customer Service