Branch Tailpiece — Installation Instructions

PP66-14W

1-1/2" x 8" Dishwasher Branch Tailpiece 5/8" branch

Pp141cp
1-1/2" X 8" Dishwasher branch tailpiece recommended Procedure for installation direct connection:
  1. Turn off water at the tap.
  2. Invert nut A and drop short tailpiece insert into it.
  3. Slide nut C and poly washer onto insert.
  4. Join insert assembly to branch tailpiece.
  5. Place new branch tailpiece up to the strainer. Measure distance required and cut to length if necessary.
  6. Loosen nut D and nut B on J Bend. Drop J Bend and discard existing tailpiece.
  7. Put rubber hose over spout on branch tailpiece. Attach clamp and tighten.
  8. Put rubber washer E into top slip nut.
  9. Attach branch tailpiece to strainer loosely.
  10. Put nut D and washer from J Bend on branch tailpiece.
  11. Position J Bend and hand tighten nuts D and B.
  12. Direct spout of branch tailpiece in the direction of dishwasher for easy drainage.
  13. Hand tighten all nuts securely. Run water to test for leaks.

NOTE: These parts are designed for a hand-tight installation. Pipe thread compound is not required.
Slip joint connection:
NOTE: Discard one nut and short tailpiece insert.
  1. Turn off water at the tap.
  2. Place new branch tailpiece up to the strainer. Measure distance required and cut to length if necessary.
  3. Loosen nut D and nut B on J Bend. Drop J Bend and discard existing tailpiece.
  4. Put rubber hose over spout on branch tailpiece. Attach clamp and tighten.
  5. Remove nut C and poly washer from branch tailpiece.
  6. Place nut C and poly washer on extension attached to sink strainer.
  7. Attach branch tailpiece to nut C loosely.
  8. Put nut D and washer from J Bend on branch tailpiece.
  9. Position J Bend and hand tighten nuts D and B.
  10. Direct spout of branch tailpiece in the direction of dishwasher for easy drainage.
  11. Hand tighten all nuts securely. Run water to test for leaks.
Installation hints: If a longer length is required, purchase a slip joint extension tube
Screw Driver Pipe or Spud Wrench (to remove old brass tailpiece). Hacksaw
Iphone8_app_screen

KEENEY CATALOG APP

  • Easily look up and find products
  • Create work lists of favorite products
  • View PDF catalogs and literature
  • Connect with Customer Service